I am following the ankle build guide, but I am stuck on the last steps of using the cable crimps to secure the steel cable through the pulley (image attached). In the BOM, the only cable crimps listed are McMaster 3914T11. However, it seems too small to be able to fit both ends of the cable through. I was wondering if the cable crimps that were referred to in the guide are different from what's listed in the BOM or if I am looking at the wrong BOM. I would appreciate it if you could let me know the product number.
Hello @delta
Thank you for reaching out. You are correct, the cable crimps used to secure the steel cables through the pulley are different than the cable crimps used near the chain.
The cable crimps used for the pulley can be purchased from McMaster-Carr under part number 3896T31. You can find them using the following link: https://www.mcmaster.com/3896T31/.
Please feel free to reach out if you have any additional questions!
Your Answer